| Customization: | Available |
|---|---|
| After-sales Service: | 2years |
| Warranty: | 2years |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Electric forklift
1. The operation and control of electric forklifts are simple and flexible, and the operating intensity of their operators is much lighter than that of internal combustion forklifts. The electric steering system, acceleration control system, hydraulic control system, and braking system are all controlled by electrical signals, greatly reducing the labor intensity of the operators. This is very helpful for improving their work efficiency and accuracy.
2. Electric forklifts are low-carbon and environmentally friendly. Generally, electric forklifts use batteries for operation, which will not have a negative impact on the environment. At the same time, the noise emitted by the engine of electric forklifts is very small, and the noise of new cars can be basically ignored.
| General | SHANGHAI GP | ||||||
| 1 | Model | CPD10 | CPD15 | ||||
| 2 | Rated capacity | kg | 1000 | 1500 | |||
| 3 | Load center | mm | 500 | ||||
| 4 | Power type | Battery | |||||
| 5 | Tire type | Front/ Rear | Pneumatic | ||||
| 6 | Wheels | Front/ Rear | 2×2 | ||||
| Dimensions | 7 | Lift heightH | mm | 3000 | |||
| 8 | Free lift heightH4 | mm | 162 | ||||
| 9 | Fork size | L*W*T | mm | 920×100×40 | |||
| 10 | Fork outside spread ( Min./ Max.) | mm | 200/968 | ||||
| 11 | Mast tilt angle | Fwd/ Bwd | deg | 6/12 | |||
| 12 | Overall length ( without fork) | mm | 2056 | ||||
| 13 | Overall width | mm | 1090 | ||||
| 14 | Mast height fork lowered | mm | 1995 | ||||
| 15 | Overall height fork raised | mm | 4042 | ||||
| 16 | Overall height( overhead guard) | mm | 2162 | ||||
| 17 | Turning radius ( outside) | mm | 1820 | ||||
| 18 | Load distance ( centerline of front axle to front face of forks) | mm | 429 | ||||
| 19 | Minimum Aisle -90 stack( Add load length and clearance) | mm | 3370 | ||||
| 20 | Wheel base | mm | 1250 | ||||
| 21 | Tread | Front | mm | 890 | |||
| 22 | Rear | mm | 920 | ||||
| 23 | Min. Under- clearance ( full load/ no load) | Bottom of mast | mm | 95/110 | |||
| 24 | Bottom of frame | mm | 95/105 | ||||
| Performance | 25 | Speed | Travel speed | With load | km/h | 11.5 | 11 |
| 26 | Without load | km/h | 13.5 | 13 | |||
| 27 | Lifting speed | With load | mm/ sec | 300 | 285 | ||
| 28 | Without load | mm/ sec | 400 | 390 | |||
| 29 | Max. Drawbar pull | With/ without load | Kn | 6 | 6.5 | ||
| 30 | Max. Gradeability | With/ without load | % | 15 | |||
| Weight | 31 | Self weight | Kg | 2900 | 3120 | ||
| Tyre | 32 | Tyre | Size | Front | 6.5-10-10PR | ||
| 33 | Rear | 5.00-8-8PR | |||||
| Power control | 34 | Battery | Voltage | V | 48 | ||
| 35 | Capacity | AH | 400/440/480 | ||||
| 36 | Electric motor | Drive motor | kw/ rpm | 5.3/1700 | |||
| 37 | Hydraulic motor | kw/ rpm | 8.2/1600 | ||||
| 38 | controller | American ( USA CURTIS electric controller)/ American GE | |||||
){kind=link}